Fractional resurfacing is a new laser treatment modality that creates numerous microscopic thermal injury zones of controlled width, depth, and density that are surrounded by a reservoir of spared epidermal and dermal tissue, allowing for rapid repair of laser-induced thermal injury. This unique modality, if implemented with proper laser-delivery systems, enables high-energy treatments while minimizing risks.


Indications:
Skin resurfacing (to improve texture)
Pigmented lesions: Age spots / brown spots / sun spots
Wrinkles around the eyes
Acne scars
Surgical scars
Melasma (mask of pregnancy)
Actinic Keratoses


Specifications
Laser Type: 10.6μm
Output Power: ≥20W
Starting Voltage: ≤25kV
Operating Voltage: ≤15kV
Operating Current: ≤25mA
Focal length of working head: F=50mm
Indication Beam: Diode Laser(532nm, 5mW)
Transmission System: 7-Articulation Joint Spring Arm
Smoke Exhausting System: Built-in air blow
Cooling System: Water cooling
Environmental temperature: 5-40C
Relative Humidity: ≤80%
Power Supply: AC220V; 50Hz
Dimension: 430mm*350mm*1050mm
Weight: 25kg

Working Mode
Continuos: Power 1~30W step adjustable each 1 W
Pulse: Power 1~30W step adjustable each 1
Interval time: 1~999ms
Ultra pulse: Power 1~30W step adjustable each 1
Modulated frequency of 1000 Hz
Pulse Duration: 90-1000μs

Scanning mode:
Scan mode: Ellipse, Rectangular.
Scanning Range: 15*15mm
Repeat Delay: 0.1s---- 5.0s.
Micro Pulse Energy: 5mJ---50mJ.
Treatment Level: 0.30%-----25.0%.
Passes: 1-----10 times.
Estimated Power: 24mJ--1000J.
Ellipes estimated power: 31mJ----1000J
Rectangular estimated power: 24mJ----981J
Treatment area: 0.1*0.1mm, ----- 20*20mm.
Handpiece Velocity: 0.1-----9cm2/s
Scanning Depth: <1.8mm